Homepage
THINGS YOU WILL NEED : 1. A pair of gloves 2. Refilable fat permanent marker (preferably renolds permanent marker) 3. Plastic sheet 4. Scissors 5. Safety cutter 6. Permanent ink bottle 7. Diagonal cutting plier
STEP-1
Place the plastic sheet on the table to avoid permanent in messing up your table. Open the marker and dearrange the parts. Dont forget to wear the gloves!
STEP-2
Take the top part of the marker. Hold the nip of the marker with the plier and pull it out.
Using the plier hold the inside section of the top part and twist it hard to break the plastic frame which is inside (it holds the nip).
This will take multiple attempts and do so with great care!
If you already have a hole in the top part without any construction inbetween you don't need to do this!
STEP-3
Cut the top part of the marker with the cutter. (This might take a few attemts. Do so with care.)
STEP-4
Take the felt out of the marker and slit the plastic tube along the length from top to bottom.
STEP-5
Press the felt and twist it throught the top part which you cut before. Cut the extra bit using the safty cutter leaving a fat nip.
STEP-6
Press the nip against a flat surface to flatten the nip, then cut it around the edge of the marker so that it gets fixed there and you can also place your cap properly.
STEP-7
Pour the permanent ink in the tube leaving a gap for the felt to fill up or else if you fill up the tube fully with ink it will over flow when you put the felt inside the tube.
STEP-8
Rearrange the marker. Shake a bit before using. Your SREK MOP is ready!!
SAFETY TIPS
1. Use the safty cutter and plier sensibly and very cautiously because if it slips it might cost you a finger!!
2. Keep the marker erect (nip facing the sky) or else it might start dripping.
3. Keep the marker in a zipper bag to ensure that if you are carrying it inside your bag it doesnt spills.
4. Use the marker only on a smooth surface like metal, plastic, tiles to ensure durability of the nip. Tagging on a wall would be a bad idea!
5. Dont press the nip too hard while writing.
6. Dont forget to refil when running on empty.
7. You can add some painters acrylic to add volume and thickness to the ink.
Create a Graffsociety gallery to enjoy our regular valuable prize battles, tips, resources, and get your artworks viewed by thousands of people around the world!
Like us on Facebook
Sponsors
Create a Graffsociety gallery to enjoy our regular valuable prize battles, tips, resources, and get your artworks viewed by thousands of people around the world!
Like us on Facebook
Sponsors
